Rootes Manual WSM.143/144
Section A (Cooling System)

Page 9

5. Press the shaft into the impellor until the pump housing abuts against the face of the adaptor ring. If excessive pressure is exerted on the shaft after the rear face of the housing has made contact with the adaptor ring, the pump bearing will become damaged. Refer to the General Data Section, in this publication, for the impellor to pump housing clearance..

6. Position the drive-shaft over the fan hub and press it in to place, maintaining the specified distance from the housing mounting face to the front face of the hub, as shown in Fig. 10.

---

---

WSM SECTION A COOLING PAGE

A 1

A 2

A 3

A 4

A 5

A 6

A 7

A 8

A 9

	+ The Roots of Rootes   + History of the Tiger   + Tiger Model Overview   + Tiger Production   + People & Pioneers   + Workshop Manual   + Factory Race Equipment   + Literature: Books   + Articles & Videos   + Advertising   + See Rootes Resources		+ History of the Tiger   + Sunbeam Tiger 2005   + Early Race History   + Ken Miles, an appreciation   + The "Beastie" explained   + The Playboy Pink Tiger   + Casting a Light on Lucas   + LeMans at Goodwood 2002   + Monterey Historics 2003   + My Life With Cars   + See Articles & Humor		+ High Perf. Exhaust   + Tiger Dash Restoration   + 350 Lunati Tiger   + Installing a T5   + Sound Advice   + Installing New Carpet   + The Ackerman Angle   + "Cool It Buddy"   + 3 Point Belts   + Tiger Rotisserie Plans   + Tiger E-Mail List Archives   + See Technical Tips		+ Tiger Club Information   + Events Calendar   + Service Directory   + Owner's Gallery   + Buyer's Guides   + Contributing Editors   + Team Tiger Updates   + Photo Gallery   + See Online Resources