A Tiger Rotisserie Design

An Article by Wally Menke
February, 2001

---

Page 5

Car Mounted Brackets (2)

Conversion Table (1 in. = 25.4 mm)

Metric	English	Metric	English
10 mm	3/8 in.	50 mm	~2 in.
		70 mm	~ 2.8 in.
20 mm	~2.4 in.	76 mm	~3 in.
25 mm	~3.2 in.	80 mm	~3.2 in.
40 mm	~19.7 in.	110 mm	~4.3 in.
45 mm	~43 in.	125 mm	~5 in.

For a slightly different construction, with fore-aft bottom beams at the ends of the Rotisserie, rather than the middle, look at Rob Guerra's set-up.

---

End of Article

---

Take a look at our Regional Clubs section for more information and tips.

	+ The Roots of Rootes   + History of the Tiger   + Tiger Model Overview   + Tiger Production   + People & Pioneers   + Workshop Manual   + Factory Race Equipment   + Literature: Books   + Articles & Videos   + Advertising   + See Rootes Resources		+ History of the Tiger   + Sunbeam Tiger 2005   + Early Race History   + Ken Miles, an appreciation   + The "Beastie" explained   + The Playboy Pink Tiger   + Casting a Light on Lucas   + LeMans at Goodwood 2002   + Monterey Historics 2003   + My Life With Cars   + See Articles & Humor		+ High Perf. Exhaust   + Tiger Dash Restoration   + 350 Lunati Tiger   + Installing a T5   + Sound Advice   + Installing New Carpet   + The Ackerman Angle   + "Cool It Buddy"   + 3 Point Belts   + Tiger Rotisserie Plans   + Tiger E-Mail List Archives   + See Technical Tips		+ Tiger Club Information   + Events Calendar   + Service Directory   + Owner's Gallery   + Buyer's Guides   + Contributing Editors   + Team Tiger Updates   + Photo Gallery   + See Online Resources